I have updated this page one last time so that you always can use the installation. You will find the newest versions with the 'new' link in my instruction. Have fun.

English version (Modexplanation, installation, informations)
What is the "XVM" mod?
Its a mod, which shows you the number of battles from any player (for example 5k), the overall winrate (for example 50%) and the efficiency rating (for example 1.500). The efficiency rating is given by average destroyed in the battle, average damage in the battle, average spotted in the battle, average defense points in the battle and average captured points in the battle. XVM stands for Extended Visualization Mod
How to install (first installation or update)
First installation
Step 1. Close the game.
Step 2. Download and install DokanLib 0.6.0 (Can only be installed on your C: Disk (just 200KB))
Step 3. Download the newest version (XVM full) and save it into your World of Tanks mainfolder. Should normally be C:\Program Files\World_of_Tanks.
Step 4. Rightclick on the file and click on "Extract here". If you get asked if you want to replace the files, click yes (all).
Step 5. Now, there is a new folder into your WoT mainfolder, its called "xvm-doc". Open that folder, then open the "samples" folder and then open the "Full config EN" folder. Copy this XVM config file to C:\Program Files\World_of_Tanks\res_mods\-gameversion-\gui\flash.
Step 6. Start the game with the new "wot-xvm-proxy" (With XVM 3.0.4 its called "xvm-stat") exe which is located in your WoT mainfolder. It will open a black config window, and max. 5 seconds later will WoT get started. Dont close the black config window!
Step 7. Play the game!
Update (modversion)
Step 1. Close the game.
Step 2. Download the newest version (XVM full) and save it into your World of Tanks mainfolder. Should normally be C:\Program Files\World_of_Tanks.
Step 3. Rightclick on the file and click on "Extract here". If you get asked if you want to replace the files, click yes (all).
It should look like this:
0-599 = bad player
600-899 = player below average
900-1199 = average player
1200-1499 = good player
1500-1799 = great player
1800+ = "epic" player

/Picture from XVM v3.0.3 | WoT v0.8.0\ (Winchances and clanicons are off)
Infos about the mod
* Microsoft .NET Framework 2.0 or higher is required to run this mod. You can check your version here.
*XVM-2.1 was released with new EU proxy server (automatic update within 7 days)
*If you want to play the game without the mod, just start the normal WorldofTanks.exe
*You can see your ratings and other things on this site
*(! This mod includes the OverTargetMarker !) If you want to use the mod without the OverTargetMarker, open the XVM config file and search line ""useStandardMarkers": false" and change 'false' into 'true')
*This mod is incompatible with some minimap mods. If you got an red minimap, uninstall your minimap mod or uninstall the XVM mod.
*For more informations about the mod, read the "readme-en" file in C:\Program Files\World_of_Tanks\xvm-doc after installing the mod.
*Winchance: The winchance (global) is given by the efficiency and winrate of all players in battle.
*You can see now the number of battles a player played with one tank in winrate color.
Just download this config file and copy it to C:\Program Files\World_of_Tanks\res_mods\-gameversion-\gui\flash. Overwrite the old config file (or save the old to another location, if you dont like the new one)
Thanks to guguloi for this config file!
Deutsche Version (Moderklärung, Installation, Informationen)
Was ist die "XVM" Mod?
Diese Mod zeigt euch die Gefechte eines Spielers, seine gesamte Siegesrate und die Efficiency. Die Efficiency ergibt sich aus den durchschnittlichen Kills, dem durchschnittlichen Schaden, den durchschnittlich gespotteten Feinden, den durchschnittlichen Verteidigungspunkten und den durchschnittlichen Eroberungspunkten. XVM steht für Extended Visualization Mod
Installation (Erstinstallation oder Update)
Erstinstallation
Schritt 1. Beendet das Spiel falls geöffnet.
Schritt 2. Ladet euch die DokanLib 0.6.0 runter und installiert sie.(Kann nur auf der standardmäßgen C Festplatte installiert werden (nur 200KB))
Schritt 3. Ladet euch die neuste Version (XVM full) runter und speichert die gepackte runtergeladene Datei im WoT Hauptordner. Bei einer Schnellinstallation ist dieser Ordner hier: C:\Program Files\World_of_Tanks.
Schritt 4. Führt einen Rechtsklick auf die Datei aus und klickt auf "Hier entpacken". Wenn ihr gefragt werdet, ob ihr Dateien ersetzen wollt, klickt auf "Alle".
Schritt 5. Jetzt gibt es im WoT Hauptordner einen neuen Ordner, dieser heißt "xvm-doc". öffnet den Ordner, klickt dort auf "samples" und dort auf "Full config EN". Kopiert die XVM config Datei nach C:\Program Files\World_of_Tanks\res_mods\-Spielversion-\gui\flash.
Schritt 6. Startet das Spiel mit der neuen "wot-xvm-proxy" (Mit der XVM v3.0.4 heißt diese Datei "xvm-stat") Exe, die sich nach dem Entpacken in eurem WoT Hauptordner befindet. Es wird sich ein schwarzes Configfenster öffnen, welches kurz danach das Spiel startet.. Schließt das schwarze Configfenster nicht!
Schritt 7. Spielt das Spiel!
Update (Modversion)
Schritt 1. Beendet das Spiel falls geöffnet.
Schritt 2. Ladet euch die neuste Version runter und speichert die gepackte runtergeladene Datei im WoT Hauptordner. Bei einer Schnellinstallation ist dieser Ordner hier: C:\Program Files\World_of_Tanks.
Schritt 3. Führt einen Rechtsklick auf die Datei aus und klickt auf "Hier entpacken". Wenn ihr gefragt werdet, ob ihr Dateien ersetzen wollt, klickt auf "Alle".
Wenn ihr es richtig gemacht habt, sollte es ingame so aussehen:
0-599 = Schlechter Spieler
600-899 = Unterdurchschnittlicher Spieler
900-1199 = Durchschnittlicher Spieler
1200-1499 = Guter Spieler
1500-1799 = Sehr guter Spieler
1800+ = Ausgezeichneter Spieler

/Bild aus XVM v3.0.3 | WoT v0.8.0\ (Winchancen und Clanicons sind ausgeschaltet)
Infos über die Mod
*Microsoft .NET Framework 2.0 oder höher wird benötigt um diese Mod zu benutzen. Ihr könnt eure Version hier überprüfen.
*XVM-2.1 wurde mit einem neuen Proxy Server released (Automatisches Update innerhalb von 7 Tagen)
*Wenn ihr das Spiel ohne die Mod spielen wollt, startet einfach die normale WorldofTanks.exe
*Ihr könnt eure Efficiency auch hier berechnen.
*(! Diese Mod beinhaltet den OverTargetMarker !) Wenn ihr die Mod ohne den OverTargetMarker spielen wollt, öffnet eure XVM Configdatei und sucht die Zeile ""useStandardMarkers": false". Wechselt das 'false' in ein 'true' und speichert die Datei.
*Diese Mod ist mit einigen Minimap/HUD Mods unkompatibel. Wenn ihr eine rote Minimap habt, deinstalliert eure Minimap Mod oder deinstalliert die XVM Mod.
*Für mehr Informationen über die Mod, lest die "readme-en" Datei in C:\Program Files\World_of_Tanks\xvm-doc nachdem ihr die Mod installiert habt (Auf englisch!).
*Winchance: Die Winchance (Global) wird aus der Efficiency und der Winrate aller Spieler des Matches errechnet.
*Ihr könnt nun auch die Anzahl der Spiele die ein Spieler mit dem Panzer den er fährt gemeistert hat sehen (Die Anzahl der Spiele wird in der Farbe der Winrate des Panzers angezeigt)
Ladet einfach diese Configdatei runter und kopiert sie nach C:\Program Files\World_of_Tanks\res_mods\-Spielversion-\gui\flash. Überschreibt die alte Configdatei oder speichert sie in einem anderen Ordner falls euch die neue nicht gefällt.
Danke an guguloi für die Configdatei!
As it often leads to confusion, I would like to emphasize again that this mod was not created by me. I'm just advertising for it.
This mod is from an russian modding team.
XVM mod homepage - You have to register to read the site in english.








